Set The Date And Time - Beumer BM 95 Mode D'emploi

4.2 Set the date and time

It is essential that you set the date and time. Otherwise, you will not be able to save your measured
values correctly with a date and time and access them again later.
There are two different ways to access the menu from which you can adjust the settings:
• Before initial use and after each time you replace the battery:
When inserting batteries into the device, you will be taken to the relevant menu automatically.
• If the batteries have already been inserted:
Press and hold the function button [+] on the device when switched off for approx. 5 seconds.
The year flashes on the display.
In this menu you can adjust the following settings in succession:
Year ➔ Month ➔
1. Set the year using the +/- buttons on the side (you can select a year between 2020 and 2099). To
confirm the year, press the memory button M.
2. The month now flashes on the display. Set the month using the +/- buttons. To confirm the month,
press the memory button M.
3. The day now flashes on the display. Set the day using the +/- buttons. To confirm the day, press
the memory button M.
4. The hour now flashes on the display. Set the hour using the +/- buttons. To confirm the hour,
press the memory button M.
5. The minute now flashes on the display. Set the minute using the +/- buttons. To confirm the min-
ute, press the memory button M.
Day Hour
➔
45
Minute
➔