Displaying And Deleting Ecg Measured Values; Beurer Cardio Expert; System Requirements - Beumer BM 95 Mode D'emploi

Background information and medical statistics for your doctor can be found in the "Annex for at-
tending doctor" document included with your device.

6.5 Displaying and deleting ECG measured values

The device has two user memories. Each user memory can store up to 60 measurements. Once
all memory spaces in a user memory have been used, the oldest measurements are replaced by
the most recent.
You can access stored measurements on the device at any time. Proceed as follows:
1. With the device switched off, press the memory button M. The last
stored measured value in the selected user memory is displayed.
To access the measured values in the second user memory,
press and hold the memory button M for 3 seconds.
2. To navigate between the individual measurements, press the mem-
ory button M.
If you want to delete the entire memory of the respective user, press the M memory button again
and press and hold it together with the START/STOP button

7. " beurer Cardio Expert"

To obtain a detailed representation of your recorded data, you can install the PC version of "beurer
CardioExpert" from the supplied CD or download the app, which is available as a free download from
the Apple App Store or Google Play. The data can be transferred via USB interface or Bluetooth
When plugging the device into the computer`s USB port for data downloading, please keep the de-
vice lying flat (horizontally) on the table.

System requirements

PC version
• Windows 7 SP1 or higher
• USB 2.0 (Type A) or higher
for 5 seconds.
56
M
.
®