RODE NT-USB Mode D'emploi page 12

22 Using the NT-USB with your Apple iPad
The NT-USB can be used to record with an Apple iPad using
the USB Camera Connection Kit applicable to your iPad version
(available as an accessory from most Apple retailers).
To record with the NT-USB on an iPad, simply connect the
microphone to your iPad via the Camera Connection Kit, and
the NT-USB will automatically replace the iPad's internal audio
circuitry as the input and output source.
From there, you can record the NT-USB using your preferred
application. We recommend using 'RØDE Rec' (RØDE's dedicated
audio app), Apple's 'GarageBand' app, or Imageline's 'FL Studio
Mobile' app.
Safety & maintenance
®
After use the NT-USB should be removed from its tripod mount,
wiped with a dry, soft cloth and placed in the supplied protective
pouch.
Be sure to place the moisture-absorbent crystals (supplied) at the
head of the microphone, so as to absorb any moisture present.
Eventually this pack of crystals will need to be dried. This is
indicated by the crystals turning pink in colour. They can easily be
re-used by placing them in an oven at 100 - 150 degrees celsius
for approximately ten minutes. The crystals will operate effectively
again once they have turned blue.
After using the pop filter we recommend wiping it down with a
clean, dry cloth to prevent a build-up of moisture.
23