Fuse Replacement; Warranty Information - BriskHeat X2 Manuel D'instructions

FUSE REPLACEMENT

Fuse should be replaced with properly rated fuse: 15 AMP @ 250VAC max. Fast-acting, example
part number: Bussman ABC-15-R
Do not replace fuse with live power applied to controller. Only
authorized personnel should replace fuse.
1. Remove power from unit.
2. Replace the blown fuse with a new one of the specified amperage.
3. Apply power to unit.
4. If replacement fuse immediately fails, contact BriskHeat
your issue.
BACK VIEW

WARRANTY INFORMATION

BriskHeat warrants to the original purchaser of this product for the period of eighteen (18) months
from date of shipment or twelve (12) months from date of installation, whichever comes
first. BriskHeat's obligation and the exclusive remedy under this warranty shall be limited to the
repair or replacement, at BriskHeat's option, of any parts of the product which may prove
defective under prescribed use and service following BriskHeat's examination, is determined by
BriskHeat to be defective. The complete details of the warranty can be found online at
www.briskheat.com or by contacting us at 1-800-848-7673 (toll free, U.S. / Canada) or
1-614-294-3376 (Worldwide).
®
© BriskHeat Corporation. All rights reserved.
X2 Benchtop
PID Digital Temperature Controller
®
for more information concerning
Fuse holders can be removed using
a flat-head screw-driver.
15
PID Digital Temperature Controller
4800 Hilton Corporate Dr, Columbus, OH 43232
Toll Free: 800-848-7673
Phone: 614-294-3376
Fax: 614-294-3807
Email: bhtsales1@briskheat.com
®
© BriskHeat Corporation. All rights reserved.
16
X2 Benchtop