Publicité
Les langues disponibles
Les langues disponibles
Before first use
1)
Clear the exterior of the toaster as described in "cleaning"
2)
Connect your toaster to a properly installed wall socket.
3)
Set the browning control to "DARK" and slide down the carriage handle until it clicks into place. Do not insert any slices of bread during
this first use and let your toaster heat up for 3-4 minutes
4)
During this process, the appliance may briefly produce some smoke or smell which is due to residues on the heating elements left over
from the manufacturing process
5)
Ensure proper room ventilation during this first use. As soon as the toaster is cooled down, it is ready for use.
Operation
1)
Connect your toaster to a properly installed wall socket
2)
Using the browning control, now select your preferred preference of browning degree depending on the thickness and freshness of
the bread to be toasted
3)
Insert the bread into the bread slot (make sure the bun rack is not attached to the toaster), and slide down the carriage handle until
it clicks into place. The bread is centered in the slot to ensure even browning. The pilot light of the cancel button lights up
4)
The appliance switches off automatically as soon as the toast has the preferred browning degree. The carriage handle moves back
into its initial position thus lifting the toast slices for easy removal. The pilot light goes out
5)
Should a slice of bread accidentally be wedged in the toast slot, always unplug the appliance first. As soon as the toaster has cooled
down, remove the slice. Never use any metal objects for removal!
To stop the toasting cycle before automatic cut-off, press the mid-cycle cancel button. The carriage handle moves back into its initial position
lifting the toasted bread. The cancel button pilot light goes out.
After several cycles, slide out the crumb tray, if necessary, and wipe off any crumbs.
High lift facility
Your toaster has a high lift facility for easy removal of smaller slices: When the toasting cycle is finished, simply lift the carriage handle a little and
take out the bread.
Reheat function
Your toaster has a reheat function
Should you wish to reheat bread already toasted earlier, simply insert the bread as described above, slide the carriage handle down and press the
reheat button. Its pilot light lights up. The toaster automatically stops reheating after approx. 30 seconds.
Defrost function
To activate the defrost function start the toaster as described before and press the defrost button: FROZEN". The defrost pilot light lights up. The
toaster automatically stops at the end of the defrost cycle
Use of the Bun Rack
Your toaster features a bun rack.
If required, put the bun rack onto the bread slot. Select a browning degree and start the toasting or warm-up cycle. To set the browning degree, to
switch on or to stop the toaster, please refer to "operation"
Cleaning
1)
Make sure the appliance is unplugged and has cooled down before cleaning
2)
Regularly pull out the crumb tray and clean
3)
To avoid scratching surfaces, do not use aggressive detergents
4)
Do not put the toaster into water or any other liquid.
5
Publicité
