Steinbach Twin Notice Originale page 45

Fault description
The drive belt tears off.
The device is defective.
Installing the buoyancy aids
1. Unscrew the fixing screw
2. Take the top part
3. Stick two of the self-adhesive buoyancy
aids diagonally opposite each other
9
on the inside of the top part
Should the device still not float
sufficiently, stick on two additional
buoyancy aids
already installed.
4. Replace the top part
down again with the fixing screw
The buoyancy aids are installed.
If the problem cannot be solved, contact the customer service listed on the last page.
Cause
There are foreign objects in
the drive.
.
1
off.
2
.
2
next to the ones
9
and screw it
2
13
14
9
.
1
Remedy
Contact customer service.
Contact customer service.
1
2
2
45