How To Use - Blaupunkt BP-GIKLED11 Mode D'emploi

BP-GIKLED11
Control Panel
1
power indicator
2 light intensity/fan speed
3 timer
4 auto mode
5. Operation
5.1. Introduction
This insect killer uses an LED to attract flying insects. The fan will suck these insects into the container and dry
them. This insect killer does not produce any noisy electric shocks nor does it emit any toxins, smoke, scent or
radiation.
This insect killer is designed to be used indoors (bedroom, living room).
Keep the insect killer working for more than 48 hours at first use. Do not open the container during use. Make
sure the insects are dried to death to prevent them from escaping.
Keep the insect killer working for 3 hours before going to sleep. Make sure to keep windows and doors closed.

5.2. How to Use

1. Connect the insect killer to the power source. Install the insect killer in a dry location on a stable and non-
slippery surface.
2. Press the on-off button to switch on the appliance.
3. Press AUTO to switch on the automatic mode. The appliance will automatically switch on or off according
to the daylight condition.
4. Press the timer button to set the timer.
5. Adjust the brightness of the LED and the fan speed with the light intensity button.
6. Press the on-off button to switch off the insect killer. Disconnect from the power supply after use.
BP-GIKLED11.indd 4
5
6
7
5 h  8 h  12 h  timer off  5 h
4
on-off
indicator light
button
12/01/2021 15:53:56