Undercounter Installation - Cafe CCP06DP Serie Manuel D'utilisation Et D'installation

Installation Instructions
INSTALLING THE WINE CENTER (Cont.)
METHOD 1

UNDERCOUNTER INSTALLATION

Level the Wine Center
Adjustment of the leveling legs under the wine center
may be necessary for a proper fit in the cabinet
opening. Tilt the unit to adjust the height of the four
leveling legs.
Attach the Anti-tip Brackets
1. Pry hole covers from the top of the wine center to
reveal the holes used to install the anti-tip brackets.
2. Remove the anti-tip brackets and screws from the
accessory bag.
3. If installing to adjacent cabinets, use Screw A (Qty
4), fasten an anti-tip bracket to each side of the top
of the cabinet.
Left Side
4. If installing to
countertop, use
Screw A (Qty 2), to
attach bracket on
hinge side.
Install Toe Kick
1. Using Screw B (Qty 4), attach the toe kick brackets
to each side of the bottom of the cabinet as shown
in the picture.
Left Side
Bracket
2. Install the toe kick. Use Screw B or Screw E
depending on the color of your toe kick.
Screw
49-1000492 Rev. 3
Right Side
Screw
holes for
countertop
attachment
Right Side
Bracket
CONNECT TO POWER
ELECTRICAL SHOCK
WARNING
HAZARD
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the
power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or
electrical shock.
■ Plug into a grounded 3 prong outlet.
COMPLETE INSTALLATION - Installing to
Adjacent Cabinets
1. Remove cover.
2. Slide the wine center under the counter.
3. Install wine center to cabinetry using Screw C
(Qty 3).
Handle Side
4. Reinstall cover.
COMPLETE INSTALLATION - Installing to
Countertop
1. Slide the wine center under the counter.
2. Install wine center to
countertop using Screw
C (Qty 2).
Hinge Side
Screws
15