01. Warning
Before starting the unit you must read, take into consideration and comply with all the
indications described in this Manual.
This manual must be kept in a safe place, accessible to all users of the unit.
The unit must be started and handled exclusively by personnel instructed in its use and must be
employed only for the purpose for which it was designed.
Likewise, accident prevention standards, regulations, work centre directives and current legisla-
tion and restrictions must be taken into consideration at all times.
The logotypes of SAGOLA and other SAGOLA products mentioned in this manual, are registered
trademarks or brand names of the company SAGOLA S.A.U.
02. Introduction
This unit belongs a the family of devices designed to spray products with compressed air with a
spray gun, providing a high level of product transfer (T > 65%) and excellent quality finish, as well
as low levels of contamination.
The equipment consists of the following:
• Spray gun
• Accessory wrench
• Cleaning brush
• Instruction manual
• Case
03. Technical details
Unit with product-feed by gravity (hereinafter the Gun)
with Tip and Air Nozzle of the type described in the packaging.
Product cup:
• 0.65 litres made of plastic, with non-drip cap and device to catch any spilt product.
ir input pressure: maximum 8 bar
Net weight:
Gravity Version (without cup).......................................................................................................475 g.
Pressure Version..........................................................................................................................474 g.
Suction Version (with cup)...........................................................................................................869 g.
Connection for compressed air hose, threaded, male BSP 1/4"x19hp
Maximum operating temperature from 0 - 60
Recommended working pressure not in excess of 2.2 bar, except HVLP version, 1.8 bar (mea-
sured at the air inlet and recorded in this).
Air consumption according to Tip Table.
Community directive
ATEX Normative
(*) Non electric gun in explosion hazard areas (ATEX) must have the earthing connections
and/or static-free feed hoses.
o
C
2014/34/UE
II 2G T4 x (*)
ENGLISH