Berkel 829A-PLUS Mode D'emploi page 13

Reassembling the Center Plate
Replace the center plate as shown in the picture making sure the section joint is in its proper
place.
2. Insert the tension rod for locking and screw completely. Reassemble carefully and do not strip
the rod threads or center plate bushing threads.
Reassembling the product table
Insert the entire group on the carriage as shown
in the picture.
2. Tighten the locking knob.
Reassembling the meat pusher
Insert the rod in the meat pusher and in the hole
2. Tighten the locking knob.
BK45761 Rev. A (02-15) O
WNER
/O M • 13
PERATOR ANUAL