Berkel 829A-PLUS Mode D'emploi page 12

CLEANING THE RING GUARD
CAUTION.
2. Sanitize and allow to dry.
CLEANING THE BODY OF THE MACHINE
Clean the machine body with a damp cloth or a
sponge rinsing frequently with hot water and clean-
ing solution. Rinse with hot water. Sanitize and let air
dry.
2.
While doing this operation pay attention to the knife.
Don't open the gauge plate or you risk to be cut!
CLEANING THE COMPONENTS IN THE BASE
that can accumulate in the end area of the carriage and of the thickness plate regulation.
REASSEMBLING THE SLICING MACHINE
shown in the picture.
12 • O /O M
WNER PERATOR ANUAL
BK45761 Rev. A (02-15)