Alpina MG5001H-GS Manuel D'utilisation page 4

3. Put the funnel on the ream meat tube.
4. Ensure that the rocker switch is set to the "O" position, then plug the appliance into the power supply.
5. Press the rocker switch to the "ON" position (the ream meat rod and the blade turn anticlockwise/counter
clockwise); when the appliance is operating normally, put the meat pieces into the funnel then press the food
pusher to the lowest position.
Note: Cut all food into pieces (sinew less, boneless and fatless meat is recommended) with an approximate
size of 20 mm x 20 mm x 60 mm so that they fit easily into the hopper opening.
6. The operating time during each period of use must not exceed 7 minutes, and there must be at least 10
minutes rest time between periods of use.
7. Place a clean container of an appropriate size under the locknut to receive ground meat coming from the
appliance.
8. When grinding is finished, unplug the appliance from the power supply. Disassemble the ream meat tube
assembly: Press the release button properly with the thumb of one hand (see arrow 1 of Fig.3) and turn the
ream meat tube assembly clockwise with the other hand, then remove them (see arrow 2 of Fig.3).
Caution: Ensure that the main unit is unplugged during the disassembly process.
Reverse function
1. If jamming occurs, press the rocker switch to the "O" position, then wait at least one minute until the ream
meat rod has come to a complete stop.
2. Press the rocker switch to the "R" position; the ream meat rod will begin rotating anticlockwise/counter
clockwise and the ream meat tube will empty. If the appliance still doesn't work, press the rocker switch to
the "O" position and clean the appliance.
Note: Operating time with the switch in the "R" position must not exceed 5 seconds.
Cleaning and Maintenance
1. Unplug the appliance from the power supply before cleaning the appliance.
2. Remove the blade, cutter head, locknut, funnel, screw press support, connecting ring cookie disc, cookie
cup, etc., then wash them in water.
Caution: The blade is sharp, so handle it carefully when cleaning.
3. Wipe the outside surface of the main unit with a damp cloth, then dry it thoroughly.
Note: 1. Never immerse the main unit in water to clean it.
2. This appliance cannot be washed in the dishwasher.
1. Press the release button
Fig. 3