Alpina MG5001H-GS Manuel D'utilisation page 3

Operation Manual
Before the first use, please clean all the detachable parts such as the locknut,
cutter, blade, crusher bar, sticky tube, pressure bar and filler. The blade is
sharp; ensure that your hands are not harmed.
Use of the appliance
1. Attach the ream meat tube to the main unit. Press the release button with the thumb of one hand (see
arrow 1 of Fig.1) and hold the ream meat tube with the other hand. Insert it into the hole in the main unit
and turn it anticlockwise/counter clockwise until it cannot move any longer (see arrow 2 of Fig.1).
Release the release button; the ream meat tube is now attached to the main unit.
2. Assemble the ream meat rod, blade, blade disk and locknut as illustrated (see Fig. 2) before ream meat
tube. The appliance can be used when that is done.
Note: During the assembly process, make sure the edge of the blade is toward the
blade disk. Never assemble the blade so that it is reversed.
Caution: Make sure the appliance is unplugged during the assembly process.
The edge of the blade
1. Press the release button
Align the location lug with
the groove
Fig. 2
Fig. 1