Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WEIGHT MEASUREMENT
kg
kg
GB
Automatic switching off
Switching between the measurement units
You can switch between the measurement units (kilograms/pounds/stones) following way:
If the unit switch is located in the battery compartment:
1.
Open the cover of the battery compartment on the bottom of the scale.
2.
Using the switch, select the units in which the weight should be displayed.
If the unit switch is located on the bottom of the scale:
1.
Locate the switch on the bottom of the scale.
2.
Using the switch, select the units in which the weight should be displayed.
If the unit switch is located on the bottom of the scale:
1.
Locate the switch on the bottom of the scale.
2.
When the scale is switched off , press the button for switching between the units. The LCD display shows
which unit was just used. Change the unit by pressing the button again.
WARNINGS
20
1.
In order to achieve accurate results, the scale should be placed on a fl at,
hard and stable surface and placing it on a carpet or other soft surfaces
should be avoided. Ensure before weighing that there is no foreign
object under the scale.
2.
Step carefully on the scale – the scale switches on automatically. Stand
evenly on the scale, do not move and wait until the weight indicator on
the display stabilizes.
The device automatically turns off when you step off the scale. The automatic
shutdown occurs in the event that the display shows "0.0" or when it shows
the same weight for about 8 seconds.
Overload
Scale overload occurred (maximum load is marked on the scale).
Please, step off the scale to avoid damaging it.
Empty battery
The battery is low, replace with a new battery.
Publicité
Table des Matières
