Leveling The Refrigerator - Dacor DRF36 Série Instructions D'installation

Installation instructions

8. Leveling the Refrigerator

English
34
3/8" (10 mm) bit
Front Rear
Adjustable shaft
(3/8", 10 mm)
1. Using your drill and the bit shown
below, engage each of the refrigerator's
adjuster shafts in turn, and level the
refrigerator. (CW , CCW )
2. Adjust the gap between the furniture
and CABI TOP COVER to 1/8 in. (3 mm).
CAUTION
The front and rear leveling legs have a
maximum height adjustment of 3/4 in.
(20 mm).
If greater height is required, the installer
may raise the refrigerator on a sheet of
plywood or runners.
Raising the refrigerator above 3/4 in.
(20 mm) will damage the front and rear
leveling components.
Jack type (height adjustment)
Max
20 mm