INSTALLATION MANUAL
GALEO
Weatherproof Illuminated Keypad with remote electronics
Thank you for buying our products and for the confidence you placed
in our company.
1] KEY FEATURES
Polished heavy duty Zamak
alloy, high resistance to vandalism
12 backlit keys
2 independent relay outputs
(5A@250VAC)
Surface mount, indoor/outdoor
Free voltage*
Mounting with Torx
Weather resistant, keypad sealed
with epoxy
PCB of remote electronics protec-
ted with a varnish coating
100 user codes customisable by each user
Codes can range from 4 to 5 digits
Adjustable time relay of up to 99''
for each relay output or latched
Each output is assignable by group rank
Available in Wiegand version (GALEOW)
and with 3 relay outputs (GALEO3R)
Audible and visual feedback
*Input voltage : 12V to 24Vac and 12V to 48Vdc
Consumption
12 V
(3 relay outputs activated and
keypad illuminated)
90 mA
AC
100 mA
DC
2] NOTES & RECOMMENDATIONS
Cable
The distance between the GALEO and the remote
electronic can not exceed more than 10 meters.
Make sure that the cable is not near by a high
voltage cables (ex: 230 V AC).
Recommended cable between the
GALEO and the remote electronic
To expand the supplied 3 meter cable, select a 2
twisted pairs cable (4 wires), SYT1 0.8MM (AWG 20).
Recommended power supplies suitable
for the GALEO :
ADC335 (230V input) or BS60 (230V input).
2
cdvigroup.com
cast
®
screws
®
24 V
48 V
46 mA
-
55 mA
30 mA
Environmental tests:
vibrations
WEEE
Environmental test:
Salt spray
IP64
CE certification
-25°C to +70°C
REMOTE CONTROLLER
CE certification
WEEE
IP52
-20°C to +70°C
Mounting recommendations
Mount the keypad on a flat surface to avoid any
vandalism and to insure the best mounting.
Security advice
For security advice reasons, change the factory
default master code. When selecting a master code
and user code avoid sequencial codes (example :
3 4 5 6 7).
Back EMF protection
To secure the system from back electromagnetic
fields do not forget to mount the varistor in parallel
on the lock.
EN