Toro ECX Aide-Mémoire page 7

Manual Operations
Operating Selected Zone(s)
1. Ensure the control dial is in the
position.
2. Position the
PROGRAMS
sary to select the program with the
assigned station(s).
3. Press the
MANUAL START
4. The first station assigned to the program
will begin flashing. To select this zone,
press the +/ button. To skip this zone,
ON
press the –/
OFF
any additional zones in this manner.
5. Press the
MANUAL START
6. To select zones from another program,
repeat steps 2 trough 5.
(
CONTINUED
AUTO
switch as neces-
button.
button. Continue selecting
button.
Turning Off The Controller
)
When the control dial is turned to the
position, the timer immediately shuts off any
/
ON
watering operation currently in progress.
Leaving the control dial in the
prevent all automatic and manual watering
operations.
For extended shutdown of the sprinkler
system, leave the control dial in the
position.
Timer operation is resumed by turning the
control dial to the
position will
OFF
OFF
/ position.
AUTO ON
7
OFF