Cleaning Before Use; Electrical Connection - Haier AFL Notice D'utilisation

English

Cleaning before use

Make sure that you have removed, from the appliance, all the
adhesive strips which restrain the accessories, clean all internal
parts with lukewarm water and neutral soap, vinegar or sodium
bicarbonate, in order to remove the characteristic odour of new
parts, then dry carefully.
Do not use detergents and/or abrasives containing soda, or
solvents which could damage the finishes.

Electrical connection

Before you insert the plug in the power socket, make sure
that:
• you hands are not wet or humid;
• voltage and frequency on the serial number plate match
those of the domestic power supply (a swing of -6% to +6%
is permitted for nominal voltage; for operation at different
voltages, use a transformer of adequate power);
• the cable and plug are not damaged or crushed by heavy
objects;
• the power cable is not too tight: extensions to reach the
socket are not permitted.
IMPORTANT: do not connect the appliance to rectifiers
(e.g. sun plants) or by an extension lead.
IMPORTANT: the appliance must be connected to an
efficient earth plate.
To this end, if the power socket of the domestic system is
not connected to earth, connect the appliance to a separate
efficient earth system, in compliance with current legal
regulations, consulting a specialised technician.
The Manufacturer declines all and any responsibility if this
accident prevention regulation is not respected.
This appliance conforms to the following EU directives:
B.T. 73/23/EEC
93/68/EEC
9
M
D I U T E
N A
S O
B O
A R
B I C