Control Buttons - Aukey DR02 D Mode D'emploi

System LED Indicators
There are four indicators in total. Each camera unit has an LED indicator that
faces outside (to let others know you have cameras active). The front camera
has an LED indicator which faces inside and an on-screen indicator (both for
your reference). The outward LED indicators on both cameras can be switched
off if you want the dash camera system to be even less visible to people outside.
Go to Setup > Detect Led > select Off > press OK.
Outward LED Status
Indicators
Solid Green
Flashing Green
Note: In Motion Detection mode, only the inward LED indicator will be on in standby.
Once motion is detected, all indicators will operate the same as normal recording.

Control Buttons

Recording Mode
Button
Enter Emergency
Recording mode
View playlist
(short press)
Turn on/off Audio
Recording
(long press)
Open Setup menu
(short press)
Take a snapshot
(long press)
Inward LED Status
Indicator
Solid Green
Flashing Green
Playlist & Setup Menu
Return to
previous menu
Move up
Move down
- 05 -
Screen Indicator
Off
Flashing Red
Meaning
On; not recording
On; recording
Playback Mode
Return to
playlist / Stop
Delete / Rewind
Lock & Unlock /
Fast-forward