Before Using For The First Time; Transport Inspection - CS Unitec MAB 525 Mode D'emploi

Before using for the first time

T r a n s p o r t i n s p e c t i o n
Pr e p a r a t i o n s
Ad d i t i o n a l s a f e t y m e a s u r e s f o r c e r t a i n o p e r a t i o n s
No n - h o r i z o n t a l w o r k i n g p o s i t i o n
M AB 5 2 5
The machine is supplied as standard with the components
indicated in chapter Components/scope of supply .
NOTE
► Inspect the delivery for completeness and obvious signs of
damage . Report an incomplete or damaged delivery to your
supplier/dealer immediately .
This chapter contains important instructions for the necessary
preparations before starting work .
Additional safety precautions must be taken for the following
operations with the machine:
W AR NING
R i s k o f i n j u r y f r o m
When working in inclined or vertical position and during
overhead work, the machine must be secured to prevent it from
falling using the safety chain (D) supplied .
► Check the safety chain for proper function before every
use . A damaged safety chain must not be used . Replace a
damaged safety chain immediately .
► Attach the safety chain in such a way that the machine
moves away from the operator in the event of slipping .
► Lay the safety chain as tightly as possible around the handle
of the machine .
► Check the secure fitting of the safety chain and lock before
starting work .
► Use the protective equipment stipulated in chapter Personal
protective equipment.
Before using for the first time
t h e f a l l i n g m a c h i n e .
1 5