Before Using For The First Time; Pr E P A R A T I O N - CS Unitec MABasic 200 Mode D'emploi

Before using for the first time

T r a n s p o r t i n s p e c t i o n
As standard, the machine is supplied
with the components indicated in the
Components/delivery contents"section.
NOTE
► Check for visible signs of damage or
missing items on delivery. Report an
incomplete or damaged delivery to
your supplier/retailer immediately.
P r e p a r a t i o n
This section contains important instructions
on the required preparation before beginning
any work.
A d d i t i o n a l s a f e t y m e a s u r e s f o r
c e r t a i n w o r k
Additional safety precautions must be taken
for the following operations with the machine:
No n - h o r i z o n t a l w o r k p o s i t i o n
W AR NING
R i s k o f i n j u r y f r o m
When working in an inclined or vertical
position or during overhead work, the
machine must be secured using the safety
lashing strap (21) supplied to prevent it
from falling.
► Before using, check the safety lashing
strap for proper function. A damaged
safety lashing strap may not be used.
Replace a damaged safety lashing
strap immediately.
M A B a s i c 2 0 0 , 4 0 0 , 4 5 0 , 8 5 0
a f a l l i n g m a c h i n e .
Before using for the first time
W AR NING
► Attach the safety lashing strap in such
a way that the machine can fall away
from the operator if it slips.
► Lay the safety lashing strap as tightly
as possible around the handle of the
machine.
► Before beginning word, check that the
safety lashing strap and the lock is
firmly seated.
► Use the protective equipment
stipulated in the section Personal
protective equipment.
W o r k o n s c a f f o l d i n g
W AR NING
R i s k o f f a l l i n g f r o m
m o v e m e n t s o f t h e m a c h i n e .
When working on scaffolding, the machine
can make a sudden oscillating movement
on starting or in the event of interruption to
the power supply.
► Secure the machine with the safety
lashing strap (21) supplied.
► Wear a safety harness to protect
yourself against falling.
s u d d e n o s c i l l a t i n g
1 3