Connecting Using An Optical Cable - Samsung HW-Q60T Mode D'emploi

• If TV sound is inaudible, press the
the Soundbar to switch to "D.IN" mode. The screen displays "D.IN" and "TV ARC" in sequence,
and TV sound is played.
• If "TV ARC" does not appear in the display window of the Soundbar main unit, confirm that the
HDMI cable is connected to the correct port.
• Use the volume buttons on the TV's remote control to change the volume on the Soundbar.
NOTES
• HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
• If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one
whose diameter is less than 14 mm.
• This function is not available if the HDMI cable does not support ARC.

Connecting using an Optical Cable

Bottom of the Soundbar
DIGITAL AUDIO IN (OPTICAL)
1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV
with a digital Optical Cable (not supplied).
2. Press the (Source) button on the top panel or remote control, and then select the "D.IN" mode.
HDMI TO TV
(ARC)
Top of the Soundbar

(Source) button on the remote control or on the top of
Optical Cable
(not supplied)

OPTICAL OUT
ENG - 11
D.IN