nVent RAYCHEM Elexant 9200i Mode D'emploi page 8

LED Bar Graph
Graph status LEDs
All 4 LEDs are lit
1 Yellow LED and
nVent RAYCHEM Elexant 9200i RM RSSI LED 1Y 3G
2 Green LEDs are lit
1 Yellow LED and
nVent RAYCHEM Elexant 9200i RM RSSI LED 1Y 2G 1W
1 Green LED is lit
1 Yellow LED lit
nVent RAYCHEM Elexant 9200i RM RSSI LED 1Y 1G 2W
All LEDs off
nVent RAYCHEM Elexant 9200i RM RSSI LED 1Y 3W
nVent RAYCHEM Elexant 9200i RM RSSI LED 4W
868 MHz Radio Levels
LED Bar Graph
RAYCHEM-IM-H60818-Elexant9200i-ML-2009
Green and Yellow LEDs indicating receive signal strength
Receive signal
Connection with maximum receive signal strength
Connection with very good receive signal strength
Connection with good receive signal strength
Connection with weak receive signal strength
Not connected
Configuration mode
Overload
1.2k 9.6k
–90 dBm –85 dBm
–100 dBm –95 dBm
–110 dBm –105 dBm
LINK LINK
Not Connected, Configuration more, or overload
19.2k 60k
–80 dBm –75 dBm
–90 dBm –85 dBm
–100 dBm –95 dBm
LINK LINK
RSSI voltage
2.5 to 3.0 V
2.0 to 2.5 V
1.5 to 2.0 V
1.0 to 1.5 V
0 VDC
120k RSSI voltage
–70 dBm >= 2.5 V
–80 dBm >= 2.0 V
–90 dBm >= 1.5 V
LINK ~1.0 V
0 V
nVent.com/RAYCHEM | 8