Faults; Maintenance Tasks; Frost Protection - Windsor Saber Compact 16 SP Mode D'emploi

Maintenance Tasks

Replacing the squeegee blades
Remove the squeegee.
Unscrew the star grips.
Remove the plastic parts.
Remove the squeegee blades.
Insert new squeegee blades.
Insert the plastic parts.
Screw in and tighten the star grips.
Replacing the brush rollers
Empty the dirty water reservoir.
Press the appliance to the bottom using
the pushing handle.
Swing the running gear to the front with
your foot.
Press in the brush and remove down-
wards.
Insert the new brush roller and lock into
place.
Swing the running gear backwards with
your foot.
Maintenance contract
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Windsor sales
office.

Frost protection

In case of danger of frost:
Empty the fresh and dirty water reser-
voirs.
Store the appliance in a frost-protected
room.

Faults

Danger
Risk of injury. Turn the program selection
switch to "OFF" and disconnect the mains
plug before performing any works on the ap-
pliance.
Drain and dispose of the dirty water and
the residual fresh water.
In case of faults that cannot be remedied us-
ing the table below, please contact the cus-
tomer service.
13
English