Maintenance / Cleaning; Storage When Not In Use - SilverCrest SJBG 20 A1 Manuel D'utilisation Et Informations Sur Les Services

Maintenance / cleaning

Maintenance
Servicing is necessary if the yoghurt maker has been damaged or if liquids or objects
have penetrated the housing, if the yoghurt maker has been exposed to rain or moisture
or if it does not work properly or has been dropped. If smoke is produced, or there are
any unusual sounds or smells, switch off the yoghurt maker immediately and remove the
mains plug from the socket. In such cases, the yoghurt maker should not be used until it
has been inspected by authorised service personnel. Only have qualified personnel
carry out the servicing on the device. Never open the housing of the yoghurt maker.
Cleaning
Remove the mains plug from the socket before cleaning as there is a risk of an electric
shock!
Wait until the yoghurt maker has cooled down completely. Otherwise, there is a risk of
burns!
The yoghurt maker must not be immersed in water!
When cleaning the yoghurt maker, never use any solvent or cleaner that would corrode the plastic
material. Ensure that no liquid can penetrate the housing of the yoghurt maker. You thus avoid
damage to the yoghurt maker. Remove leftovers immediately after use so that they cannot solidify in
the device. To clean the device, proceed as follows:

Clean the yoghurt maker (6) and the cover (1) inside and out only with a soft damp cloth. Use
some washing-up liquid if necessary. Rinse with clear water.

Clean the other accessories (cover (2), strainer (3), container (4,5)) in a basin of warm water
and washing-up liquid or in a dishwasher.

Dry the yoghurt maker and accessories thoroughly.

Storage when not in use

If you do not use the yoghurt maker, ensure that the device and its accessories are clean before
storing them in a dry, clean and cool location.
SilverCrest SJBG 20 A1
English - 11