Connections; Precautions During Use And Guarantee - Prodipe M850 DSP Solo Manuel Utilisateur

Masquer les pouces Voir aussi pour M850 DSP Solo:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9 – Connections
Receiver power supply:
Connect the mains adapter to the socket provided in the back of the receiver and plug into a 230V/50
Hz power source.
Audio connection:
Connect the receiver audio output cable (jack or XLR) to your mixer or broadcasting system.
10 – Precautions during use and guarantee
Particles and dust may stick to the mesh and filter, altering the microphone's frequency response.
The mesh (without the filter) should be disassembled regularly and cleaned with warm, soapy water,
rinsed with clean water, dried and reassembled.
The microphone unit is very sensitive. Please do not drop the microphone and avoid any shocks
which might damage the unit.
To preserve the sensitivity and sound reproduction quality of your microphone, it should never be
exposed to humidity or extreme temperatures (e.g. direct sunlight).
Prodipe and its distributors disclaim all liability for damage to this device resulting from use other
than as described above.
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Page 23
Copyright © 2019 IPE Music/Prodipe

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

M850 dsp duoB210 dsp soloB210 dsp duoB210 dsp headset soloB210 dsp headset duoB210 lavalier solo ... Afficher tout

Table des Matières