Use Of The Appliance; Before The First Use; Induction Principle; Sensitive Touch - Beko BCTI36510 Manuel D'utilisation

4

Use of the appliance

4.1 Before the first use

Clean your hob with a damp cloth, and then dry the
surface thoroughly. Do not use detergent which
risks causing blue-tinted colour on the glass sur-
face.

4.2 Induction principle

An induction coil is located under each heating
zone. When it is engaged, it produces a variable
electromagnetic field which produces inductive
currents in the ferromagnetic bottom plate of the
pan. The result is a heating-up of the pan located
on the heating zone.
Of course the pan has to be adapted:
• All ferromagnetic pans are recommended
(please verify it thanks a little magnet): cast iron
and steel pans, enamelled pans, stainless-steel
pans with ferromagnetic bottoms...
• Are excluded: cupper, pure stainless-steel, alu-
minium, glass, wood, ceramic, stoneware,...
The induction heating zone adapts automatically
the size of the pan. With a too small diameter the
pan doesn't work. This diameter is varying in func-
tion of the heating zone diameter.
If the pan is not adapted to the induction hob the
display will show [ U ].

4.3 Sensitive touch

Your ceramic hob is equipped with electronic con-
trols with sensitive touch keys. When your finger
presses the key, the corresponding command is
activated. This activation is validated by a control
light, a letter or a number in the display and/or a
"beep" sound.
In the case of a general use press only one key at
the same time.
Induction Hob / User Manual
4.3.1 Power selection zone
"SLIDER" and timer setting
zone
To select the power with the slider, slide your fin-
ger on the "SLIDER" zone. You can already have a
direct access if you put your finger directly on the
chosen level.
Power selection zone "SLIDER" and timer
SLIDER
4.4 Starting-up
4.4.1 Start up / switch off the
hob:
Action Control panel
To start press [ main On/Off ]
key
To stop press [ main On/Off ]
key
4.4.2 Start up / switch off a
heating zone:
Action Control panel
Switch on Press cooking
coocking zone "On/Off"
zone key
To set slide on the "SLIDER"
(adjust the to the right or to
power) the left
To stop slide to [ 0 ] on
"SLIDER"
If no action is made within 20 second the electron-
ics returns in waiting position.
setting zone
DIRECT ACCESS
Display
[ 0 ]
nothing or
[ H ]
Display
[ ON ]
[ 1 ] to [ P ]
[ 0 ] or [ H ]
13 / EN