Crosley C100BT Manuel D'utilisation page 11

Platine tourne-disque
Masquer les pouces Voir aussi pour C100BT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
Turntable Maintenance
1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the
turntable mat or a record's edge.
2. Clean the stylus frequently with a soft brush with a back-to-front motion only.
3. Clean the records to get rid of dust or grease with a record cleaning brush and
record cleaning solution.
4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber cloth.
Note: Do not use cleanser other that contains alcohol, benzene or any other harsh chemicals,
which might damage the paint and finish of the turntable.
** Crosley offers a product line of different cleaning accessories. Please ask
your retailer or check out our website www.crosleyradio.com for more
cleaning product information.
Troubleshooting
There is no power
• No power at the power outlet.
• To help save power consumption, some models will comply with ERP energy
saving standard. When there is no audio input for 20 minutes, their powers will
automatically cut-off. To turn power back on and resume playing, turn off the power
and turn it on again.
Power is on, but the platter does not turn
• Turntable mode is not selected.
• Turntable's drive belt is not installed or has slipped off.
Turntable is spinning, but there is no sound, or sound not loud enough
• Stylus protector is still on.
• Tone arm is lift up by the lever.
Record sounds too fast or too slow.
• Wrong speed selected for the record.
• Pitch Control is not adjusted correctly.
11

Publicité

Table des Matières
loading

Table des Matières