USRobotics USR5463 Guide D'installation Rapide page 12

English
Windows 2000 users:
Click Windows Start > Settings, then click Network and Dialup con-
1.
nections.
2. Double-click the Local Area Connections icon and select Proper-
ties.
3. Select the TCP/IP line that has been assigned to your network card
and select Properties.
4. Configure IP addressing:
• To obtain the IP address automatically through the DHCP
server:
Click the IP Address tab, select Obtain an IP address automat-
ically and click OK > OK. This is the preferred method.
• For instructions on specifying the IP address manually, refer to
User Guide
the
Windows NT users:
Click Windows Start > Settings > Control Panel.
1.
2. Double-click the Network icon.
3. Click the Protocols tab and select the TCP/IP line that has been
assigned to your network card.
4. Click the Properties button.
5. Configure IP addressing:
• To obtain the IP address automatically through the DHCP
server:
Click the IP Address tab and select Obtain IP address from a
DHCP server and click OK > OK.
• For instructions on specifying the IP address manually, refer to
User Guide
the
Windows Me, 98, or 95 users:
Click Windows Start > Settings > Control Panel.
1.
2. Double-click the Network icon.
3. Click the Configuration tab and select the TCP/IP line that has been
assigned to your network card.
4. Click the Properties button.
5. Configure IP addressing:
• To obtain the IP address automatically through the DHCP
server:
Click the IP Address tab, select Obtain an IP address automat-
ically and click OK > OK. This is the preferred method.
• For instructions on specifying the IP address manually, refer to
User Guide
the
You can use the ping command to verify whether your computer has suc-
cessfully connected to the router. For ping command instructions, refer to
User Guide
the on the USRobotics Installation CD-ROM.
8
on the USRobotics Installation CD-ROM.
on the USRobotics Installation CD-ROM.
on the USRobotics Installation CD-ROM.