USRobotics USR5463 Guide D'installation Rapide page 11

If you have a dynamic IP address, select Dynamic IP Address as the WAN
Type in the Web User Interface, and the router will automatically obtain the
information it needs from your service provider.
If you have a static IP address, select Static IP Address in the WAN Settings
in the Web User Interface.
While trying to check my network configuration settings in Windows
Me or XP, I can't find the Network icon.
Solution:
The default setting in Windows XP and Me is to not show all of the icons within the Control
Panel. To change the default setting to show all icons:
Windows XP users:
Click Windows Start > Control Panel.
1.
2. Within Control Panel, click View all Control Panel options on the
left side of the screen.
Windows Me users:
Click Windows Start > Settings > Control Panel.
1.
2. Within Control Panel, click View all Control Panel options on the
left side of the screen.
All the Control Panel icons should now be visible.
I don't know how to configure the TCP/IP protocol to work with the
router.
Solution:
You have the TCP/IP protocol installed, but it is not configured to work with
the router.
Windows XP users:
Click Windows Start > Control Panel.
1.
2. Double-click the Network Connections icon.
3. Click the General tab, and select the TCP/IP line that has been
assigned to your network card.
4. Click the Properties button.
5. Configure IP addressing:
• To obtain the IP address automatically through the DHCP
server:
Click the General tab, select Obtain an IP address automati-
cally, and click OK > OK. This is the preferred method.
• For instructions on specifying the IP address manually, refer to
User Guide
the on the USRobotics Installation CD-ROM.
English
7