Status Led - auna 10005774 Mode D'emploi

Charging
LED indicator
Red LED is on
Red LED is off
Pairing with the Bluetooth devices
LED indicator
Red and blue LEDs blink alternately
Blue LED quickly blinks once every 2 seconds.
Blue LED quickly blinks twice every 4 seconds
Blue LED quickly blinks three times every 2 seconds Set up HFP and A2DP connection
Blue LED gradually turns on and off
Red LED blinks twice every 20 seconds
Indication tone
Ton
Two tones every 3 seconds
Three "DU" tones every 20 seconds
Problem
Why does red light blink twice
every 20 seconds?
Why is not the red light bright
when charging?
How far is the effective range
between the headset and
mobile phone?
18

Status LED

Status of the headset
Charging
Finish charging
Status of the headset
Pairing mode
Not connected to a device
Set up HFP or A2DP connection
Conversation mode
Low power
Bedeutung
Conversation mode and microphone mute
Low power
Troubleshooting
Possible Solution
Battery is low, need to be recharged.
Please make sure the charging device connects with headset well.
You didn't use the headset for a long time, the battery may dry up.
At this time, you have to char- ge the battery for 30 minutes, and
then the red light will be bright.
According to the Bluetooth standard: the max. controllable
range of Class2 headset is 10 meters. It varies under different
environment.