auna 10005774 Mode D'emploi page 15

Pairing the headset with Bluetooth transmitter
You can enjoy music wirelessly through connecting headset with stereo Bluetooth transmitter. Pairing
steps are as follows:
1 Keep the Bluetooth transmitter and headset in the range of 1 meter when pairing.
2 Make the headset enter into pairing mode (refer to "How to enter into pairing mode).
3 Turn on the Bluetooth transmitter. It will search Bluetooth device automatically and start pairing.
4 When the headset requests PIN No, the Bluetooth transmitter need to respond "0000" automati- cally.
5 After successful pairing and connecting, the blue LED of headset quickly blinks twice every 4 se- conds.
NOTES: The pairing password is "0000", so, the headset can't pair with the Bluetooth transmitter which
pairing password is not "0000". If the pairing is still not successful after trying several times, please
refer to your Bluetooth trans- mitter manual carefully.
Multi-pair
The headset can connect with two devices at most. One is the mobile phone with HFP profile, another
is the devices with A2DP profiles. If you want to finish the pairing of several Bluetooth devices, please
refer to the following steps:
1 Firstly, pair the headset with Bluetooth transmitter (refer to "pairing headset with Bluetooth trans- mitter).
2 Switch off the Bluetooth transmitter.
3 Pair and connect the headset with the Bluetooth mobile phone (refer to "pairing headset with Blu-
etooth mobile phone").
4 Restart Bluetooth transmitter, it will connect with headset automatically.
NOTE:
After successful pairing with several Bluetooth devices, the paired devices will remember each other.
Unless pairing information is deleted because of new pairing, otherwise make mobile phone and head-
set set up hands free connection next time, and re-start the Bluetooth transmitter, then the connection
of several devices can be performed. For the mobile phone which supports the HSP and A2DP at the
same time. It may set up connection with HSP and A2DP simultaneously. At this time, start Bluetooth
transmitter may not connect with the headset again.
Re-connecting to a Bluetooth device
Automatic connecting
Every time the headset is switched on. It will connect to last connected device automatically.
Manual connecting to last connected HFP device
When the headset is in standby mode and doesn't connect to any HFP devices, short press MFB but- ton
twice, it will connect to last connected HFP device automatically.
Manual connecting to last connected A2DP device
When the headset is in standby mode and doesn't connect to any A2DP devices, short press > (next
song) button, it will connect to last connected A2DP device automatically.
15