Presentation; Delivery Condition; General Information - Chauvin Arnoux D38N Mode D'emploi

1.1 DELIVERY CONDITION

Each D clamp is delivered in a cardboard box with a user's manual and a verification certificate.
For the accessories and spares, consult our web site:
www.chauvin‑arnoux.com

1.2. GENERAL INFORMATION

The D current clamps are designed to measure alternating currents without opening the circuits or
powering down the installation.
The shape of the D clamps makes it easy to enclose busbars carrying the current to be measured.
With a maximum jaw opening of 90 mm, the clamp can be used on cables up to 64 mm in diameter or
on various types of busbars: 5 busbars of 125 mm x 5 mm or 3 busbars of 100 mm x 10 mm, with the
spacing between the busbars equal to their thickness.
The D38N clamp is intended for measuring alternating currents and displaying them on an oscilloscope.
Clamp
D38N
This clamp can withstand a 20% overload on all the ranges and for 10 minutes on the 3,000 A
Output is via a coaxial cable terminated by a BNC socket.

1. PRESENTATION

Output
0.3 V
ac
14
Range (A )
ac
30 ‑ 300 ‑ 3,000
range.
ac