DURAVIT Darling New 610001 Notice D'utilisation page 49

Problem
Indicator lamps and alarm function
The buzzer emits
a constant ticking
sound.
The status display
on the unit flashes
red, green or orange.
The FI circuit breaker
keeps triggering.
General function
SensoWash is not
®
working.
Potential cause
The water supply to
the unit is faulty or
disconnected.
D
Malfunction.
The leakage current is
too high.
SensoWash is not
®
switched on.
Solution
> Disconnect the mains
supply and make sure the
water supply is in order.
Then re-establish the mains
connection.
> Remove the connection to the
mains supply and stop using
the unit. Contact your local
authorised customer service
in order to service the unit.
> Remove the connection to
the mains supply and stop
using the unit. Contact your
local electrical installation
engineer.
> Press the "Power" button
for longer to return to the
normal operating mode
(see chapter 6).
EN
49