Operating Instructions; Switching On And Off; Overload Protection - Flex LST 803 VR Mode D'emploi

Operating instructions

t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=éçïÉê=íççäI=
éìää=çìí=íÜÉ=ã~áåë=éäìÖK
Before switching on the power tool
Unpack the power tool and check that the
delivery is complete and not damaged.

Switching on and off

LST 803 VR
 Press and hold down the starting
lockout (1.).
 Press the switch (2.) and release
the switch interlock (3.).
 To switch off, release the switch.
LST 1503 VR
Brief operation without engaged
switch rocker:
 Push the switch rocker forwards and hold
in position.
18
Bush hammering machine LST 803 VR, LST 1503 VR
 To switch off the power tool, release
the switch rocker.
Continuous operation with engaged
switch rocker:
 Push the switch rocker forwards and
engage by pressing the front end.
 To switch off the power tool, release the
switch rocker by pressing the rear end.

Overload protection

 If an extremely brief overload occurs,
the overload protection prevents damage
to the motor by automatically switching
the device off.
For further information on the manufacturer's
products go to www.flex-tools.com.