Test Light Tool Instructions - Radio System Corporation Pet Safe ST-100 Manuel D'utilisation

Test Light Tool Instructions

1. Turn the Receiver Collar on.
2. Hold the Test Light
Tool Contacts to
the Contact Points.
3. Press the Stimulation
Button on the
Remote Transmitter.
4. The Test Light will
fl ash. Note: At higher
Stimulation Levels,
the Test Light will
fl ash brighter.
5. Turn the Receiver
Collar off.
Save the Test Light Tool for future testing. Note: If the Test Light Tool
does not fl ash, replace the Receiver Collar batteries and then re-test.
If Test Light Tool still does not fl ash, contact the Customer Care Centre
or visit our website at www.petsafe.net.
www.petsafe.net 27