Fit The Receiver Collar - Radio System Corporation Pet Safe ST-100 Manuel D'utilisation

Receiver Collar Function
Power off
Normal operation - Low battery 3 fl ashes every 5 seconds
Static Stimulation
STEP 3

Fit the Receiver Collar

Important: The proper fi t and placement of your Receiver Collar is
important for effective operation. The Contact Points must have direct
contact with your dog's skin on the underside of his neck.
Please refer to page 2 for Important
Safety Information.
To assure a proper fi t, please follow these steps:
1. Make sure that the Receiver Collar is
turned off.
2. Start with your dog
standing comfortably (3A).
3. Place the Receiver Collar
on your dog's neck close
to the ears. Center the
Contact Points underneath
your dog's neck, touching
the skin (3B).
Note: It is sometimes
necessary to trim the hair
around the Contact Points
to make sure that contact
is consistent.
Red LED Response
On for 3 seconds
On length of button press
3B
3C
www.petsafe.net
3A
15