Processor; Inputs; User Interface; Power Supply Specifications - dBTechnologies OPERA 10 Mode D'emploi

RMS amplifier power:
Peak power:

PROCESSOR

Internal controller:
A/D D/A converter:
Limiter:

INPUTS

Inputs:
Outputs:

USER INTERFACE

Controls:

POWER SUPPLY SPECIFICATIONS

Draw at 1/8 of full power in average
use conditions (*):
Draw at 1/3 of full power in
maximum use conditions (**):
Draw with speaker turned on without
signal (idle): :
Inrush current:
* INSTALLER NOTES: The values refer to 1/8 of full power, in average operating conditions (music program with infrequent or no clipping). It
is recommended to consider them the minimum sizing values for any type of configuration.
** INSTALLER NOTES: The values refer to 1/3 of full power, in heavy operating conditions (music program with frequent clipping or activation
of the limiter). We recommend sizing according to these values in case of professional installations and tours.
OPERA10 OPERA12 OPERA 15
34
Peak, RMS, Thermal
1x balanced/unbalanced Combo (XLR/Jack)
Level control, ground lift switch, 8-position DSP preset rotary switch
0,92 A (230 V) - 1,65 A (115 V)
2,25 A (230 V) - 4,05 A (115 V)
600 W
1200 W
56-bit DSP
24 bit/48 kHz
1x XLR link OUT
14 W
14,07 A
COD. 420120247 REV. 1.1
English