Power Supply Connection; Connecting The Outputs Of Multiple Modules (Audio Daisy Chain) - dBTechnologies OPERA 10 Mode D'emploi

POWER SUPPLY CONNECTION

• Connect the power cable to the socket (7), then set the turning on selector (6) to ON. The Limiter LED
(3) blinks briefly.
POWER SUPPLY

CONNECTING THE OUTPUTS OF MULTIPLE MODULES (audio daisy chain)

It is possible to connect the output of an OPERA speaker to a second speaker using a cable with XLR balanced
connector, which connects the output (2) of the first speaker to the input (5) or (4) of the second speaker.
Set the relevant selector to "LINE".
The Out Routing Selector (2) in "CH1 link" position allows providing the output of the second speaker with only
the signal coming from the CH1 (5) channel. In the "Mix Out" position, it allows the CH1 (5) and CH2 (1) channel
mixing.
WARNING!
Use only good quality cables.
Replace any damaged cable to prevent malfunctioning and sound poor
quality.
OPERA10 OPERA12 OPERA 15
28
English
COD. 420120247 REV. 1.1