Product Description; Scope Of Delivery And Device Parts; Uv Curing Unit; Safety - Trodat DRYTEQ SET Mode D'emploi

equipment described in this manual. In the interest
of technical progress, Trodat GmbH reserves the
right to update information contained in this
document at any time without notice.

2 Product description

A
A.3
A.2
A.5
A.1
A.4
A.6
A.7

2.1 Scope of delivery and device parts

A dryteq

UV curing unit

1 On/off switch
2 Push button
3 LED battery and
status display
4 Side handle parts
5 USB – C socket
6 Placement area
7 Reflector with
UV LED
B C
C.10
C.13
B.8
C.12
B.9
C.14
B C
USB cable Stamp
8 USB-C
10 Handle
plug
11 Insert for
9 USB plug
ink cartridge
12 Ink cartridge
13 Cover for
ink cartridge
14 Stamp's
closing cap

3 Safety

This chapter provides an overview of all the
important safety aspects required for the safe
and defect-free operation of the device. Other
chapters in this manual contain specific safety
instructions to prevent and avoid dangers.
This device is exclusively for curing Trodat dryteq
stamp ink. Only use the dryteq set indoors.
The device is not waterproof.
Do not make any changes to the devices and
accessories. In the case of repairs carried out
independently, improper connection or improper
C.11
use, the manufacturer assumes no liability for
resulting damages.
Liability and warranty claims are excluded in
this case.

3.3.1 General safety notes

The dryteq product is NOT a toy!
Warning
Dangerous for children and persons
with reduced physical, sensory or
mental abilities
• Keep children and persons with reduced
physical, sensory or mental abilities
away from the product and its
accessories

3.3.2 UV exposure device

6
EN

3.1 Proper use

3.2 Improper use

3.3 Safety notes

Reflector with
UV LEDs
7
EN