General Information; Information About This Manual; Storage Of The Manual; Supplementary Documentation - Trodat DRYTEQ SET Mode D'emploi

1 General information

1.1 Information about this manual

Please read this manual completely and
carefully before starting up the device.
Keep it near the product for future reference.
This operating manual describes the safe and proper
handling of the device. The specified safety notes and
instructions and the general safety regulations must
be observed. Failure to follow these instructions may
result in serious injury or product damage.
Please read the operating instructions, especially
the "Safety" chapter and the respective safety
instructions, completely and carefully before using
the device. You must understand everything you
read herein.

1.2 Storage of the manual

The operating manual is part of the product and
must be kept accessible at all times. Be sure to
include this manual when handing over the
product to third parties.

1.3 Supplementary documentation

• EU Declaration of Conformity available at
www.dryteq.com
• Product data sheet

1.4 Key to symbols

Important safety instructions in this manual are
identified by the following symbols and signal words.
Danger
This signal word identifies a potential
hazardous situation which, if not avoided,
will result in death or serious injury.
Warning
This signal word identifies a potential
hazardous situation which, if not avoided,
could result in death or serious injury.
Electricity warning
This symbol draws attention to dangerous
situations caused by electrical voltage.
Failure to follow the safety instructions
may result in serious injury or death.
Caution
This signal word identifies a potential
hazardous situation which, if not avoided,
could result in minor or moderate injury.
Note
This signal word identifies possible risks
of damage to the product.
If no warranty periods are specified, the terms and
conditions of the Trodat GmbH general terms of
sale, delivery and payment apply.
The information, illustrations, tables, specifications,
and diagrams contained in this document have been
prepared to the best of our current knowledge.
All liability is excluded for errors, missing
information and resulting damage and
consequential damages. The manufacturer
assumes no liability for damage and malfunctions
resulting from non-compliance with this manual.
Any liability for damage resulting from the use of
non-original parts and accessories is excluded.
Trodat GmbH shall not be liable for any personal
injury or damage, whether direct, indirect or of a
special type, any consequential damages, loss of
business profits, business interruption or loss of
business information resulting from the use of the
4
EN

1.5 Liability and warranty

5
EN