Timer; Control Panel Locking - Mobalpa APIND633 Notice D'utilisation

Timer

The timer is able to be used simultaneous with all heating zones and this with different time settings
(from 0 to 99 minutes) for each heating zone.

Setting and modification of the cooking time
Action
To select a heating zone
To select the power level
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the time reaches [ 00 ].

To stop the cooking time
Action
To select a heating zone
To select « Timer »
To stop the « Timer »
If several timers are activated repeat the process.
 Automatic stop at the end of the cooking time
As soon as the selected cooking time is finished the timer displays blinking [00] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ ].
 Egg timer function
Action
Activate the hob
Select« Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
As soon as the selected cooking time is finished the timer displays blinking [00] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ ].

Control panel locking

To avoid modifying a setting of cooking zones , in particular with within the framework of cleaning the
control panel can be locked (with exception to the On/Off key [ 0/I ]).

Locking :
Action
Start
Hob locking

Unlocking :
Action
Start
In the 5 seconds after start :
Unlocking the hob
Control panel
Press on key [ + ]
Press on key [ + ] or [ - ]
Press on key [ ]
Press on key [ - ]
Press on key [ ]
Control panel
Press on key [ + ]
Press on key [ ]
Press on key [ - ] and [ ]
simultaneously
Control panel
Press on key [ 0/I ]
Press on key [ ]
Press on key [ - ]
Press on key [ ]
Control panel
Press on key [ 0/I ]
Touch simultaneously [ - ]
and [ + ] at front left
Press on key [ + ] front left
Control panel
Press on key [ 0/I ]
Touch simultaneously [ - ] and [ + ]
at front left
Press on key [ - ] front left
19
Display
The zone control light is on
[ 1 ] .... [ 9 ] [ P ]
The timer displays [ 00 ]
[60] wents to 59,58,57,......
The time increases...
Display
The zone control light is on
The remaining time
Displays [00] then stops
Display
The zone control lights are on
Time [ 00 ] minutes
[60] wents to 59,58,57,......
The time increases...
Display
[ 0 ] or [ H ] on 3 displays
No modification
[ L ] on 3 displays
Display
[ L ] on 3 displays
[ 0 ] or [ H ] on 3 displays
No light on the displays