Starting-Up; Pan Detection; Residual Heat Indication; Automatic Cooking - Mobalpa APIND633 Notice D'utilisation

Starting-up

To turn off the hob press first the [ 0/I ] key, then the heating zone [ + ]:
 Start-up/ switch off the hob :
Action
To start :
To stop :
 Start-up/ switch off a heating zone :
Action
To choise the zone
Increase power
Decrease power
Stop
If no actiont is made within 20 second electronics returns in waiting position.

Pan detection

The pan detection ensures a perfect safety. The induction doesn't work :
 If there is no pan on the heating zone or if this pan is not adapted to the induction. In this case
it is impossible to increase the power and the display shows [ U ]. This symbol disappears
when a pan is put on the heating zone.
 If the pan is removed from the heating zone the operation is stopped. The display shows [ U ].
The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking
continues with the power level setted before.

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are still hot
and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive object on them . There are risks of burn and fire.

Automatic cooking.

All the cooking zones are equipped with an automatic "go and stop" cooking device. The cooking
zone starts at full power during a certain time, then reduces automatically its power on the
preselected level.
 Start-up :
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
 Switching off the automatic cooking :
Action
Zone selection
Power level selection
Control panel
touch the key [0n/Off]
touch the key [0n/Off]
Control panel
touch key [ + ]
touch key [ + ]
touch key [ - ]
simultaneous [ + ] & [ - ]
Control panel
Press on key [ + ]
Press on key [ + ]
Press on key [ + ]
Press on key [ - ]
Control panel
Press on key [ - ]
Press on key [ + ]
Display
[ 0 ]
nothing or [ H ]
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]
Display
[ 0 ] and control light on
[ 1 ] ...... to....... [ 9 ]
[ 9 ] is blinking with [ A ]
[ 9 ] [ 8 ] [ 7 ] .........[ 1 ]
[ 7 ] is blinking with [ A ]
Display
[ 9 ] [ 8 ] [ 7 ]........ [ 0 ]
Level selected
18
Control light
switch on blinking
switch off
Control light
on
on
on
on