Before First Use - Domo DO9211AV Mode D'emploi

DO9211AV

BEFORE FIRST USE

1. Insert the adaptor's connector into the DC jack input at the back side of the
diffuser.
2. Place the diffuser on a flat and stable surface and away from the edge.
3. Remove the diffuser's cover.
4. Pour mineral water (bottled or tap water) into the water tank up to the maximum
level indicated (100 ml).
5. Then add a few drops of essential oils (3-6 drops) or home fragrance (5-10 drops)
to the water tank.
6. Replace the cover on the diffuser.
7. Plug the adaptor into the outlet.
OPERATION
1. Press once to start the diffusion and the lighting ambiance.
2. Press a second time to set the color of the ambiance lighting of your choice; the
diffusion is continuing.
3. Press a third time to turn the ambiance lighting off; the diffusion is continuing.
4. Press a fourth time to switch completely the diffuser off.
When the water level in the tank is too low or at zero, the diffuser stops automatically.
In that case, top the water up by following the "before first use" steps to go back to a
normal working.
32