Setting The Controls - Ebac 2000 Série Mode D'emploi

Setting the controls

______________________________________________________________________
CONTROL PANEL
1. Mode Button
2. Max Continuous/8 Hour Run
3. Low/Quiet Fan Speed
4. Full Fan Speed
5. Smart Control Indicator
6. Continuous Run Indicator
7. Fan Speed and Air Cleaning Indicator
8. Amber Standby/Green Run
9. Red Container Full Indicator
Smart Control
Your dehumidifier is fitted with a patented intelligent Smart Control System. We recommend that
all customers use the intelligent system, which automatically adjusts the running pattern of your
Ebac according to changes in the weather and your lifestyle.
To activate Smart
To activate Smart Control, press the mode button(1) until SMART HIGH(5) is displayed on the
control panel. The unit should start in this mode automatically when connected to the mains. The
unit will now automatically adjust itself to work at the times needed to maintain the ideal
conditions for your home. It normally takes 2-4 weeks to get the humidity in your home under
control. Once signs of excess moisture have gone we would recommend that you switch to a
lower setting by pressing the mode button(1) until SMART LOW(5) is displayed on the control
panel. The unit will still work using Smart Control but for less time each day.
Every home is different and it is worth trying your unit on SMART LOW(5) which has lower
running costs. There may be times when you need SMART HIGH(5) or even MAX(2) running
because you are producing more excess moisture or outside conditions have worsened.
NOTE: SMART LOW(5) mode may not be suitable for all homes and /or at certain times of the
year. If signs of excess humidity return switch off SMART LOW(5) by pressing the mode
button(1) until the control panel shows SMART HIGH(5).
GB
(Model variant 2 as shown below for 2250e, 2650e and 2850e)
61