Setting The Controls; Fan Speed Control - Ebac Powerdri Série Mode D'emploi

Getting the most from your Powerdri
1. Ensure internal doors are kept ajar where possible to allow air circulation.
2. Ensure external doors and windows are kept closed as much as possible
3. Ensure the unit is positioned on a flat, even surface.

Setting the controls

Humidistat
Turn the humidistat to the appropriate symbol on the dial. When drying is complete switch off the
dryer by turning the Humidistat to its lowest setting and unplugging the dryer from the mains. When
using for automatic humidity control initially turn to the highest setting, when signs of excess
moisture are reduced, gradually turn the humidistat dial anti-clockwise to the point where the dryer
just switches off. This level of humidity will now be maintained.
If signs of excess moisture re-appear, increase the humidistat setting slightly until the problems
are again under control.
2
Setting
Mid humidistat setting for homes with general moisture levels
Control unwanted moisture wherever it occurs
Assists with indoor laundry drying
Dry rooms and plaster quickly and effectively
High humidistat setting for maximum extraction
32
Dual Dial Models
1
Power On and Container Full
1
Indication

Fan Speed Control

2
Humidstat
3
Fan Speed Control
3
Setting
1
2
To adjust fan speed
Turn the fan speed dial to
desired position
Function
Low/Quiet Setting
High Setting for
maximum extraction
GB