Before Operation - Ebac 2000 Série Mode D'emploi

Important
Your Ebac 2000 is packed in a plastic wrapping, please ensure that it is disposed of safely and where it will not be a
danger to children.
This dehumidifier should not be used by children and by persons with reduced physical, sensory or
mental capabilities, unless they have been given instructions on the safe use of the appliance and they
understand the hazards involved. Children should not play with the dehumidifier and any maintenance
or cleaning of the product should not be made by children.

Before operation

1. Stand your dehumidifier upright for at least 2 hours prior to operating.
2. Open the water container door, remove the water container – replace and close the door. This will reset the
sensors which may have been activated during transit.
Getting the most from your Ebac 2000
1. Ensure it is always connected to the mains.
2. Ensure your Ebac 2000 Smart Control does not switch off for long periods of time due to an incorrect humidistat
setting (if activated).
3. Ensure internal doors are kept ajar where possible to allow air circulation.
4. Ensure external doors and windows are kept closed as much as possible. This also saves wasting heat from your
home.
5. Ensure the unit is positioned on a flat, even surface.
Positioning your Ebac 2000
Your Ebac 2000 Smart Control is designed to be used wherever you have a condensation or dampness problem and
can be easily moved to the desired location. To ensure that you get the best service from your Ebac 2000 Smart
Control do not place the dehumidifier next to a radiator or other heat source as this will reduce the performance of
your dehumidifier.
58
GB