Crosscall X-DOCK Mode D'emploi page 7

While charging the X-LINK
by connecting a cable to the USB connector located on the back of the
X-DOCK (1A max).
When charging using the X-LINK
power is shared between the 2 charging points (the USB delivers 1A max and
X-LINK up to 3A)
TM*
The charging time depends on the type and method of charging used.
The X-DOCK charge indicator lights up in red only when the charging is
done using the X-LINK™*. When the phone is fully charged or the X-DOCK
is in standby, the charge indicator is off.
To avoid prematurely draining the smartphone battery, we recommend
that you follow the battery charging instructions for each charging cycle.
To do this, it is better to top up the battery when it reaches 20% and avoid
charging it beyond 80%, rather than topping it all the way up to 100% from
zero.
DATA TRANSFER (COMPUTER ONLY):
1. Connect the X-DOCK to your computer.
2. Position the 2 X-LINK
X-DOCK)
3. Your mobile phone automatically magnetises and the charging process
starts.
4. Open the different modes in the drop-down menu available in the
notification bar. NB: Depending on the version of Android, this menu may
vary slightly.
• File transfer: direct access to the internal memory and micro SD card
(if inserted).
• PTP: for transferring photos
• CD-ROM: Driver installation for PC
• No data transfer: Charge mode
, it is possible to charge another product
TM*
and USB at the same time, the charging
TM*
connectors opposite each other (smartphone and
TM*
EN
FR
ES
DE
IT
PT
NL
HR
PL
SL
AR
7
SR