VONROC CR503DC Traduction De La Notice Originale page 13

3. Then, slide the hose on and twist coun-
ter-clockwise to secure.
4. To remove, twist the hose clockwise and slide
hose off.
Note: Many inflatables have an internal flap that
prevents air loss during inflation, especially air mat-
tresses. Unless this flap is displaced by the nozzle
the inflatable will not inflate. Push the nozzle firmly
into the valve to make sure that you push this flap
out of the way.
WARNING: Risk of Bursting. Excessive air pressure
may cause a hazardous risk of bursting or personal
injury. Check the manufacturer's maximum pressu-
re rating for items being inflated.
For some valves you need a different size connector
then the standard size on the low pressure hose:
• Place the adapter that is connected to the low
pressure hose (11) on to the end of the hose.
• Choose between the Large, Medium or small
connectors (13).
• Check the fit before attaching it to the low pressu-
re hose (11).
• Attach the chosen connector by pushing it on the
low pressure hose.
Deflate
Connecting the low pressure hose to the compressor
(Fig. H2)
1. Remove the low pressure hose (11) from the
storage (12).
2. Push the hose into the deflate connection (25)
3. Insert the hose into the object being deflated,
using the correct adapter
Setting the Automatic Shut­Off Pressure
During use of the low pressure mode it is not possi-
ble to use Automatic shut-off pressure.
Worklight (4) (Fig. E)
Note: While the battery is assembled on the machine
or connected with 12V cigarette plug and the machi-
ne is in sleep state, the LEDs will not turn on.
• In order to switch on the machine, press the Pres-
sure selector (21) and the display (28) will go on.
• Turn on the worklight by pressing the worklight
switch (26).
• Turn off the worklight by pressing the worklight
switch (26).
WWW.VONROC.COM
4. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
battery pack from the machine.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt. Re-
move very persistent dirt using a soft cloth moiste-
ned with soapsuds. Do not use any solvents such
as gasoline, alcohol, ammonia, etc. Chemicals such
as these will damage the synthetic components.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/EC
for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
are no longer usable must be collected separately
and disposed of in an environmentally friendly way.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of defects
in both materials and workmanship for the period
lawfully stipulated starting from the date of original
purchase. Should the product develop any failure
during this period due to defective material and/or
workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or
improperly maintained;
• Non-original spare parts have been used.
This constitutes the sole warranty made by compa-
ny either expressed or implied. There are no other
warranties expressed or implied which extend
EN
13