AIRLUX AHB682IX Mode D'emploi page 66

Remark：
Install the expansion pipe on the cooker hood if need. Fix the expansion pipe with a cable
tie.(The expansion pipe and cable tie are not supplied with the product. They are optional.)
OPERATION
There are five buttons:
above.
1. After connecting to power, indicator light will lit on, all the output close and the hood will
enter standby mode. The indicator light will be off automatically after reminding if no
operation.
2. Power on: Press power button
speed. Indicator light of low speed
and its indicator light will be off. All the function operation of the hood will be closed, the
hood enters into standby mode, and run by circle.
The speed buttons and lamp button can work separately and not controlled by the power
button. When a certain function button is pressed, the hood operates at that function
status. Press (Power) button under any status, the cooker hood will be switched off without
any functions.
3. Press lamp button
power button
light of lamp button
4. Press the (High) button once, motor runs on high speed, the indicator light of high
button and power button
stop. Indicator light of high button and power button will be off,and run by circle.
5. Press the (Mid) button once, motor runs on middle speed, the indicator light of middle
(Low), (Mid),
once, its indicator light will lit on, the hood works at low
once; lights will be turn on. Indicator light of lamp button
will lit on. Press lamp button
and power button
will beam. Press high button
(High), (Lamp),
will be bright. Press power button again to close it,
again to turn off the lights. Indicator
will be off. And recycle like this.
66
(Power).See picture
again and the motor will
and